the-new-panels
  Development of the complete set of panels for a false ceiling of the dome form is finished.
This complete set allows to create partial illumination if to use as a basis for lamps and a quite good diluting of a flat surface on the greater area of a ceiling.
Топ новости
  • Narrow screen resolution
  • Wide screen resolution
  • Wide screen resolution
  • Increase font size
  • Default font size
  • Decrease font size
Friday 10 Sep 2010
You are here: Home FAQ
Often asked questions
Thursday, 28 May 2009 11:14

Question: On what surface panels of wall the Wave fasten?
The answer: Panels of wall the Wave fasten on the prepared surface. The prepared surface can be gypsum cardboard, facing plaster leveled under a level, directing for gypsum cardboard with frequency of 300 mm., the wooden bar is desirable for not using as during the periods spring, autumn the bar starts to twist. 

Question:What wood screws and what a concrete insert to apply at installation of panels of wall?

The answer: To bracing panels are applied basically plastic finger-type a concrete insert, for bracing to gypsum cardboard it is necessary to use special a concrete insert. Wood screws are used standard - universal various length. It is desirable to use the anodized or zinc-coated wood screws that there was no rust. 

 

 

Question: How panels are joined?

The answer: The design of panels allows to create raised works in any direction, therefore drawing on one edge for example at the left, is continuation or the beginning of drawing on the right on this panel. At assembly it is necessary to try to observe, a level then all panels will ideally coincide on drawing, tolerances on joinings drawing are equal 1 - 0,5 mm.   

 

Question: What front putty to apply at a sealing of joints?

The answer: In the market now a wide range of front putties on латексной, акриловой to a basis, all depends on use of a paint, gypsum a material soft accordingly it is necessary to select soft qualitative front putties. We basically use front putty MAXI of firm Sadolin on a dolomitic basis.    

 

 

Question: What tools are used at a fettling of seams in acoustic panels of wall?

 The answer: At a fettling of seams and on the wall and acoustic panel the abrasive abrasive cloth with various grain and profile holders with various a profile is used basically. At great volumes are applied мини grinding machines.

 

  

Question: What paint can be applied at painting panels of wall?

The answer:To apply it is possible any paint for an interior finish of walls. In the market there is very much a wide range from simple up to composit, with any color and a shade, with any invoice.  

Last Updated on Thursday, 24 September 2009 09:43
 

Пробки

Пробки на Яндекс.Картах
swet.jpg

The advertizing leaflet

Buklet2
One of remarkable qualities of applied technology
Modular Systems is the opportunity operatively,
To create complete sets of wall panels for an embodiment during a life
The most improbable design decisions.

The advertizing leaflet 2,08 Мб

Acoustic panels

Architectonic acoustic panels Modular systems let out on manufacture
Are applied as means of acoustic design of premises
In concert halls, house cinemas,
Rooms of listening and sound departments.

Decorative painting

color11
Owing to presence in the market of a wide range of paints and
paintings of walls and ceilings, having painted the fixed panels, you can give to your habitation special colour. 

Useful references

Architecture and design in construction on a portal your House of the Offer on development of design of an interior, landscape design, designing of houses and cottages. The prices for these sorts of services.

 

Яндекс цитирования